Celexon cat6a patch cable - s/ftp 3m, white
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Fast Worldwide Shipping
    Next Day UK Delivery
  • Positive
    Customer Feedback
  • 14 Days Money Back
    Guarantee
  • LED / Laser
    Specialist
  • Expert
    Projector Advice

Celexon cat6a patch cable - s/ftp 3m, white

Available: In Stock
£36.00 inc vat
£30.00 ex vat
£30.00 ex tax

The celexon CAT6A patch cable - S/FTP transmits network signals at a speed of up to 10 gigabits per second at an operating frequency of up to 500 MHz. This means that it can not only be used in the classic TCP/IP area, but also for IP streaming and HDBaseT infrastructures.

The common standards for home network infrastructures are CAT 5 and 6. In the professional sector, standards 7 and 8 are also used.
For the CAT 6A specification, the contact geometry in the RJ45 plugs has been optimised. Here, the maximum transmission rate and speed is achieved. The transmission speeds of standards 7 and 8 cannot be achieved with an RJ45 plug.

CAT 5: CAT 5 patch cables are still very common in private applications. In professional areas, they are increasingly being replaced by the higher standards. With a frequency of up to 100 MHz, data rates of 1 Gbps are transmitted. Especially in domestic areas, these transmission parameters are usually completely sufficient for connecting routers, computers and other devices.
CAT 6: CAT 6(A) patch cables transmit data rates of up to 10 Gbps at a frequency of up to 500 MHz. This standard is now used in all areas and is currently the most common standard in this area. For new installations, it is recommended to use this standard directly, as the cables are better protected against external influences than CAT 5 cables.
CAT 7: Patch cables with the CAT 7 standard can only transmit data rates of up to 10 Gbps at a frequency of up to 1,000 MHz with a GG45 connector. The classic RJ45 connector cannot fully utilise this bandwidth. Since the periphery is not very widespread and is comparatively very expensive, the area of application here is very limited and is found almost exclusively in professional installation areas.
CAT 8: Cables with the CAT 8 standard are used exclusively in professional areas such as data centres. Transmission speeds of up to 100 Gbps at 2,000 MHz are achieved - but only over distances shorter than 30 metres. For many 'normal' areas, the cost-benefit ratio is not balanced here.

The S/FTP (Screened Foiled Twisted Pair) specification describes the shielding structure of these patch cables.
The wire pairs are each shielded with a foil. In addition, all 4 wire pairs are shielded together with a wire braid - this corresponds to the standardisation according to ISO / IEC 11801 Ed 2.2. Thus, the cables are optimally protected against interfering external electromagnetic fields.

S/FTP (Screened Foiled Twisted Pair)
S= Screened - braided shield
F = Foiled - foil shield
TP = Twisted Pair - twisted pair wires

The LSZH cable sheathing (Low Smoke Zero Halogen) of the celexon CAT 6A patch cable consists of thermoplastic or thermoset moulding compounds and is free of halogens. Unlike PVC cables, LSZH cables produce hardly any toxic smoke gases if a fire occurs, making them particularly suitable for indoor use. In public areas where network infrastructures have to be installed close to places with a high volume of people or openly, the use of LSZH cables is prescribed by the EU. The toxic fumes from PVC when it burns pose a risk to human health.

The CAT 6A patch cables ensure high corrosion resistance and reliable transmission performance thanks to their gold-plated contacts.

KEY INFORMATION

  • RJ45 plug to RJ45 plug
  • Standard: CAT.6A, Assignment: TIA/EIA 568B
  • Transmission mode: Ethernet, HDBaseT, AVoIP etc.
  • Transmission speed: 10 Gbps
  • Bandwidth: 500 MHz
  • Connector: gold-plated precision plug contacts, transparent plastic, nickel-plated housing, flexible bend protection
  • Cable: high-purity copper strands (4x twisted pair - 7/0.135 BC), S/FTP shielding, AWG27, halogen-free LSZH sheath with 5.8 mm diameter
  • Cable colour: white
  • Cable type: Round
  • Cable length: 3m
  • REACH, RoHs compliant


IN THE BOX

1x celexon CAT 6A patch cable - S/FTP 3m, White

The celexon CAT6A patch cable - S/FTP transmits network signals at a speed of up to 10 gigabits per second at an operating frequency of up to 500 MHz. This means that it can not only be used in the classic TCP/IP area, but also for IP streaming and HDBaseT infrastructures.

The common standards for home network infrastructures are CAT 5 and 6. In the professional sector, standards 7 and 8 are also used.
For the CAT 6A specification, the contact geometry in the RJ45 plugs has been optimised. Here, the maximum transmission rate and speed is achieved. The transmission speeds of standards 7 and 8 cannot be achieved with an RJ45 plug.

CAT 5: CAT 5 patch cables are still very common in private applications. In professional areas, they are increasingly being replaced by the higher standards. With a frequency of up to 100 MHz, data rates of 1 Gbps are transmitted. Especially in domestic areas, these transmission parameters are usually completely sufficient for connecting routers, computers and other devices.
CAT 6: CAT 6(A) patch cables transmit data rates of up to 10 Gbps at a frequency of up to 500 MHz. This standard is now used in all areas and is currently the most common standard in this area. For new installations, it is recommended to use this standard directly, as the cables are better protected against external influences than CAT 5 cables.
CAT 7: Patch cables with the CAT 7 standard can only transmit data rates of up to 10 Gbps at a frequency of up to 1,000 MHz with a GG45 connector. The classic RJ45 connector cannot fully utilise this bandwidth. Since the periphery is not very widespread and is comparatively very expensive, the area of application here is very limited and is found almost exclusively in professional installation areas.
CAT 8: Cables with the CAT 8 standard are used exclusively in professional areas such as data centres. Transmission speeds of up to 100 Gbps at 2,000 MHz are achieved - but only over distances shorter than 30 metres. For many 'normal' areas, the cost-benefit ratio is not balanced here.

The S/FTP (Screened Foiled Twisted Pair) specification describes the shielding structure of these patch cables.
The wire pairs are each shielded with a foil. In addition, all 4 wire pairs are shielded together with a wire braid - this corresponds to the standardisation according to ISO / IEC 11801 Ed 2.2. Thus, the cables are optimally protected against interfering external electromagnetic fields.

S/FTP (Screened Foiled Twisted Pair)
S= Screened - braided shield
F = Foiled - foil shield
TP = Twisted Pair - twisted pair wires

The LSZH cable sheathing (Low Smoke Zero Halogen) of the celexon CAT 6A patch cable consists of thermoplastic or thermoset moulding compounds and is free of halogens. Unlike PVC cables, LSZH cables produce hardly any toxic smoke gases if a fire occurs, making them particularly suitable for indoor use. In public areas where network infrastructures have to be installed close to places with a high volume of people or openly, the use of LSZH cables is prescribed by the EU. The toxic fumes from PVC when it burns pose a risk to human health.

The CAT 6A patch cables ensure high corrosion resistance and reliable transmission performance thanks to their gold-plated contacts.

KEY INFORMATION

  • RJ45 plug to RJ45 plug
  • Standard: CAT.6A, Assignment: TIA/EIA 568B
  • Transmission mode: Ethernet, HDBaseT, AVoIP etc.
  • Transmission speed: 10 Gbps
  • Bandwidth: 500 MHz
  • Connector: gold-plated precision plug contacts, transparent plastic, nickel-plated housing, flexible bend protection
  • Cable: high-purity copper strands (4x twisted pair - 7/0.135 BC), S/FTP shielding, AWG27, halogen-free LSZH sheath with 5.8 mm diameter
  • Cable colour: white
  • Cable type: Round
  • Cable length: 3m
  • REACH, RoHs compliant


IN THE BOX

1x celexon CAT 6A patch cable - S/FTP 3m, White

 Cut off times for shipping (UK TIME BST/GMT):

These are the standard cut-off times below, however if you require an urgent shipment after these times, please call on +44 (0)1924 589 589

  • Screens & Maxlight Cabinets: 12:00pm
  • Celexon Products: 12pm
  • Pico Genie Products: 3.45pm
  • All Other Products: 3:30pm

 

Shipping Speeds & Costs
See our newly improved discounted shipping rates with up to 67% discount

Country Courier* Delivery Speed Courier / Costs Note
United Kingdom UPS

Next Working Day Delivery


Pre 12am Next Working Day Delivery

Saturday Delivery

UPS Standard (Next Working Day)
From £2.99 to £9.99

UPS Express (Pre 12pm Next Working Day) at £16.99

UPS Saturday Delivery
(Available on Request - Please email)
£19.99 inc vat

Accessories* £2.99 inc vat
Projectors £8.99 inc vat
Screens £9.99 inc vat

Timed delivery available on certain products only

UK Non Mainland parcels maybe shipped on a 48 hour shipment via Royal Mail or Amazon Logistics

NOTE: All Screens 3 - 5 Working Days

* Accessories to Ireland £4.99 (3 - 5 Business Days)

USA & Canada UPS 2 to 5 working days From £23.38 (Orders <$800 for USA no taxes / duties usually apply) For accurate shipping costs, add the product to the checkout and fill out your address

Calculate any Duties & Taxes here (if outside UK)
Northern Ireland UPS 2 to 3 working days From £9.68 (Was £16.42)
Saves 41% 
European Shipping Rates UPS 2 to 5 working days

From £11.03 (Was £15.88)
Saves 30%

Rest of World Shipping Rates UPS 3 to 7 working days (Rest of world) From £22.09
(Was £37.02)
Saves 67%

Calculated based on country, dimensions and weight

 

Delivery Terms

We reserve the right to charge for any postal surcharges levied by the courier eg for non mainland UK, Highlands and Islands.

* For some products such as screens are also shipped via UPS, TNT, DHL, DPD and some accessories are shipped via Royal Mail.

Delivery Notifications / Signing

If you can provide a mobile number and/ or an email address when you place your order, you will receive a notification of delivery.

UPS Collection Centres

If your package is shipped via UPS, customers at residential addresses can REDIRECT a delivery to a UPS ACCESS POINT (collection point) of their choice if they are not going to be in. You can notify them by email or text.  

Find your nearest collection point https://www.ups.com/dropoff/

EU & Outside UK & Taxes (more Tax info here)

Since January 1st 2021, post Brexit, all goods sold outside the UK will be sold excluding taxes. 

For more information on taxes, the shipping process and examples please SEE TAX SECTION FOR MORE INFO. 

Shipping Terms

Whilst we make every effort to deliver goods on the day we specify, we cannot guarantee delivery on that day or accept liability for deliveries made outside this timescale. Delays are rare to our courier services but they can happen especially in busy periods and no refunds can be made for delays to any postal service whatsoever. We cannot accept liability for out of pocket expenses or other costs incurred due to failed or delayed deliveries. We reserve the right to change the courier services at any time. 

All items are subject to stock availability and we reserve the right to cancel any item ordered at any time and provide you with a full refund.

When we deliver your items to you will be asked to sign for the goods to acknowledge that you have received them. If your goods fail to arrive within 28 days of dispatch, you will have the option of either a full refund or a replacement shipment as soon as we have investigated with the courier.

Where an incorrect address has been given to Personal Projector Limited we reserve the right to charge for any extra carriage costs incurred.

Claims for damage, delivery discrepancy etc. should be made within 24 hours of delivery and any photographic evidence should be immediately submitted. Claims will not be accepted after 24 hours. Please sign the consignment document 'UNCHECKED', as we cannot otherwise accept any claims for damage in transit.

PO Box Deliveries

Deliveries are made by courier and require a signature on delivery, for this reason, it is not possible to deliver to a PO Box address. However for certain products you can re-arrange delivery to a UPS Access Point location (please enquire). You can use the access point as the delivery address. To find your nearest worldwide access point visit https://www.ups.com/dropoff/. You will be notified once it arrives by text or email.

If a PO address is used in the address and it is returned to us you may need to pay for the redelivery costs (if no UPS access point is assigned by you). This applies particularly to Cyprus or countries where PO box is used as standard term on the address.